Driftwood How To Archives - Page 2 of 3

Driftwood Weathering Wood Finish Birdhouse

Weathered Wood Bird Feeder and Stand

Posted on by

Driftwood Weathered Wood Bird Feeder and Stand

I recently added this sweet weathered wood bird feeder and stand to our backyard and aged it using Driftwood Weathering Wood Finish. I wanted it to match and blend in more with our aged and weathered wood fencing. Once I had all the materials, it took about 30 minutes to assemble, stain and paint this bird feeder and stand. Pretty easy actually and now we are thoroughly enjoying watching the many birds frequent the feeder all day long. Especially Bella, our cat whose morning routine is sitting in front of the back door. She is completely mesmerized by the visiting wildlife just beyond the glass door.

Items Needed

Bird feeder. I purchased the Woodlink Cedar Bird Feeder from Amazon – $34.84
18″ Woodlink Audubon Wrap Around Squirrel Baffle also purchased from Amazon – $18.49
Driftwood Weathering Wood Finish
1 Vinyl Wrapped Wood Closet Round Pole by Woodgrain Millwork from Home Depot – 1 5/16″ x 72″
1 Galvanized steel nipple from Home Depot – 1 1/2″ x 2″
1 Iron floor flange from Home Depot – 1 1/2″
Used Sunbrella stand

I wanted a bird feeder that I could easily move around the yard and into the garage should a hurricane approach. But I also needed one that would be easy for me to fill and one that fit in with the surroundings. The more I looked at the two unused sun umbrella stands in the yard, the simplier the answer seemed to be – attach the bird feeder to a pole and insert it into the sunbrella stand. Seemed easy enough and certainly cheaper than buying a bird feeder pole kit. If you don’t have an extra sunbrella stand on hand, you can find them at yard sales, thrift stores, Craig’s List, etc. or even cheap ones online.

weathered wood bird feeder and stand — The two sunbrella stands I had on hand.

I found the style birdhouse I wanted on Amazon along with a recommended squirrel baffle.

One thing I ended up doing is removing the two wire cages on the ends of the bird feeder used for holding suet cakes. I did not find that the birds liked them although it was probably the type of suet I was using. Once I removed the wiring, I applied the Driftwood Weathering Wood Finish to give it age and create my weathered wood bird feeder and stand.

Home Depot, Lowe’s, Walmart and many other stores all carry poles and the plumbing hardware I needed to attach the bird feeder and to also set it into the stand. I purchased the vinyl-wrapped wood pole from the closet department and the flange and steel nipple from the plumbing department. I thought the vinyl would help the wood last longer in the outdoor elements. Be sure that whatever width size pole that you purchase will fit into your sunbrella stand. Most stands are adjustable to accommodate various sizes – just make sure you don’t get one too big.

Putting the Weathered Wood Bird Feeder and Stand and Together

The iron floor flange needed to be small enough to fit on the bottom of the bird feeder and the galvanized steel nipple needs to fit inside the flange. The steel nipple needs to fit over the top of the pole so that it can be easily lifted on and off.

The beauty of this bird feeder is that I can lift it up and off the pole easily when I need to refill the seed. And it sits secure enough on the pole so that I’m not worried about it coming off in any wind. I’m 5’2″ so the 2″ nipple worked perfectly for me but if you are taller, you can go with a 4 or 6″ nipple and it will really sit solidly on the pole.

I inserted the pole into the sunbrella stand, adjusted the tightening mechanism and attached the squirrel baffle about 4 feet off the ground. Then spray painted the pole black to match the baffle.

I then attached the flange to the bottom with screws and screwed the galvanized nipple into the flange. The bird feeder is now ready to slide over the top of the pole. That’s it – just slide it over the top. There is no need to screw or secure it in place. It will stay on the pole just fine and you will still be able to easily lift it on and off the pole to refill it. It’s amazingly sturdy even in the wind.

Fill it and Enjoy the Wildlife

I fill my bird feeder with white millet and it is constantly visited by morning doves, cardinals, woodpeckers and bluejays. Thankfully, the crows and grackles don’t like millet so they stay away. The baffle works perfectly to keep the squirrels out of the bird feeder as long it is placed at least 15 feet from anywhere they can jump. And every morning I have a rabbit or two mingling about the bottom of the bird feeder with the squirrels. I don’t know if they like eating the millet seed but I now put carrots out for the rabbits. We have a deal – I give them carrots and they don’t eat my hostas. So far so good…

If you prefer a more whimsical birdhouse made from actual driftwood pieces in additional to our weathered wood bird feeder and stand, check out this tutorial.

Stunning Driftwood Weathered Wood Finished Table and Chairs

Posted on by

Table & Chair Project Using Driftwood Products and Poets Paint Waterglass Paint

This is a project I’ve been working on for a year and a half, little by little, here and there until it’s finally now done. Well, not really – I still have two more chairs that need to be stripped and finished but all I have room for right now is two chairs so I’m good – for now, I’ve got my driftwood weathered wood finished table and chairs.

I not only used the Driftwood line of products on this project, including the Driftwood Weathering Wood Finish, Driftwood Weathering Wax and Driftwood Liming Wax, but I also borrowed from our sister company, Poet’s Paint Waterglass Paint and painted the caning in Vintage White. I also used one of my favorite colors, Poet’s Paint Vintage Silk Blue, which is a beautiful soft pale blue, and painted a drop cloth and used that for the chair covers.

Below, I’ve stripped and sanded this little table, then applied the Driftwood Weathering Wood Finish and finally applied the Driftwood Liming Wax.

I had my driftwood weathered wood finished table so next I started on the chairs. I have four of them that I found at a second hand store and had to have them. The carving is just exquisite but they are all heavily painted and need to be stripped. I tried stripping them myself by it was soon clear it was way too laborious and tedious and I needed to call in the professionals. I had two stripped professionally and the other two are still waiting to be done.

I still have no idea what type of wood they are made from and suspect that it is a composite. You can see there is a variation in color in the two legs on the stripped chair and that caused a variation in color when I applied the Driftwood Weathering Wood Finish.

Now I used the Driftwood Weathering Wax and waxing brush to get more gray tone and even out the color. After the Driftwood Weathering Wax, I went over by brushing it lightly with the Driftwood Liming Wax. I have found that I like the combination of the Driftwood Weathering Wood Finish with the Driftwood Liming Wax on most of my pieces and usually do both.

Now comes the chair cover. For this I used a drop cloth and Poet’s Paint Waterglass Paint in Vintage Silk Blue. I filled a plastic storage container with about 3 gallons of water and to that I added about 1/2 quart of the paint and then just soaked the two pieces of cloth that I had already cut out for about an hour. After an hour, I took the material out of the solution, rinsed it off and hung it to dry. I later soaked it again in a bath of water softner as I found the canvas cloth to be rather stiff – due more to the weight of the canvas cloth and not the paint. The softner bath helped a little so I could wrap it and staple it.

Once dry, I steamed them with a hot iron and wrapped and stapled them to make my chair covers. The color was perfect.

My chairs and table are complete and look fantastic on my sun porch.

Driftwood Weathering Wood Finish

Creating Expandable Driftwood Candleholders and Plant Holders

Posted on by

Creating Expandable Driftwood Candleholders and Plant Holders

This is an easy way to make driftwood candleholders and plant holders that will stretch to accommodate different size jars. Those pretty glass candle jars that you normally throw out after the candle burns down can now become a very pretty driftwood plant holder. The secret is simply using “stretch” bead and jewelry cord purchased from Michaels or from Amazon BEADNOVA 1mm Clear Elastic Stretch Jewelry Roll.

Materials You Will Need:

1mm Clear Stretch Beading or Jewelry Cording
Glue Gun
Glue Sticks
Drill
1/8″ drill bit
Glass container
Driftwood Pieces preferably 1/2″ or more round, and straight. If you need driftwood pieces, we have driftwood in stock. 2-6″ pieces or 5-12″ pieces.
Pencil to mark drill holes
Ruler to measure and mark for drill holes

Place a driftwood piece against your glass container. Measure 2″ up from the bottom and mark a hole for drilling. Then measure up another 2-3″ from the first mark and drill a second hole. You want the holes to line up as much as possible on each piece of driftwood.

Once your pieces are all drilled, just start threading the stretch cord through the holes. I tied knots about every 4th piece to keep spacing a little more equal when the candleholder expanded but it’s not really necessary. Pull and tighten the driftwood row.

Make Your Circle

Occasionally place the driftwood row around the circumference of the glass shade to check the fit. When you have the row the length you want – tie a final knot or two. DO NOT CUT THE CORD. Form a circle with the driftwood row and continue threading the cord through 3 or 4 driftwood pieces from the other end. Knot the ends. You can add a little bit of hot glue to the end knots or lightly melt the stretch thread with a match.

If you want to make your own driftwood for this project, check out our tutorial on How to Create your Own Driftwood – it really works.

The simple holders are also great for Using driftwood in a Party or Wedding Theme.

We actually used this same technique to create pendant light shades and they look awesome! Making driftwood pendant light shades.

Make a Driftwood Ball

Posted on by

How to Make a Driftwood Ball

Very simple tutorial to Make a Driftwood Ball or Driftwood Orb.

Materials Needed:

Pro Hot glue gun or Titebond HiPur Adhesive Applicator Glue sticks – professional glue such as:

Titebond Wood to Wood WW60 or WW30 (for use with Titebond HiPur Adhesive Applicator)
Ad-Tech Wood Glue Sticks
All Temperature Wood Stik
100 or more 2″-6″ driftwood pieces. If you need driftwood pieces, we have driftwood in stock. 2-6″ pieces or 5-12″ pieces.
Balloon or beachball. (Use extra strong balloons)

I wanted my driftwood ball to be about 10-12″ in diameter so I had to use a balloon. I found “Punch Ball” balloons at Walmart for about $3.00 for a package of 8 which were strong enough and allowed me to get the size I wanted. Once a blew up the balloon to the size I wanted, I tied it off so that I would be able to untie it easily enough to let the air out slowly when I was done instead of just popping the balloon. My driftwood ball is about 10″ in diameter and I used 100 pieces of driftwood for my project.

I started by actually gluing a driftwood piece directly to the balloon just to hold it in place. Keep in mind that once you let the air out of the balloon, it will continue to stick to the glue so you want to use as little glue as possible to hold it in place on the balloon and as few times as possible gluing directly to the balloon. I believe I glued directly to the balloon 5 times. The less you can do it the better. Ideally, you want to glue just on the driftwood pieces.

And it’s important to use a professional hot glue gun and professional grade glue sticks or the piece will not stay together. If you don’t want to use a glue gun, you can use any glue that will give you a quick and permanent adhesion – “quick” being the operative word here. You don’t want to be holding the pieces in place and waiting for them to dry.

If you live in a hot, humid climate like Florida, you will find that regular glue sticks will not hold up and your driftwood orb will quickly fall apart so it is important to use professional glue for “all temperature”. This will also allow you to use your driftwood ball outside without it disintergrating.

Continue making your way around the balloon and filling in the spaces with driftwood pieces until you like what you see.

Find where you tied your balloon and untie it then slowly let the air out. It should pull away from the glued sides but it will leave behind some pieces of balloon that will be difficult to remove unless you used as little as possible to hold it in place.

There you have it – a beautiful driftwood ball that you made in about 2 hours.

Once you’ve created your driftwood ball, the possibilities are endless as far as what you can do with it. Certainly, it’s decorative and quite textural by itself but add a string of LED lights or even just one bulb and you’ve got a unique light source. Attach dirt wrapped in moss using wire or fishing line and insert some succulent plants and you’ve now got a unique planter. Or just use it as a sculptural garden element. Whatever you decide, you now have a clever and decorative driftwood element.

Make a Driftwood Sailboat

Posted on by

This simple tutorial will show you how to make a Driftwood Sailboat. It’s actually pretty simple and they make really cute and beachy accents to any room where you want to add a beach or natural weathered wood theme. They also look great as a juxtaposition to a sleek and modern room where you want to create some unexpected visual interest.

What you Need to Make Your Driftwood Sailboat:

Driftwood piece that is linear shaped. If you need driftwood pieces, we have driftwood in stock. 2-6″ pieces or 5-12″ pieces.
White Embroidery Thread
Embroidery Needle
Old Handkerchief
Singer’s “Fray No More”
Dowel or Stick of Driftwood
2 Small Eye Screws
Drill
Scissors
Wood Glue

1. Select your driftwood piece.

I glued together these two pieces as I thought the smaller looked great on the nose of the sailboat. You can use a dowel purchased from the hardware store like I did or you can use a driftwood stick. Since my dowel was too pale, I used Driftwood Weathering Wood Finish to get a weathered wood look on the dowel and I also used it to touch up any areas that may have broken off or where I drilled to keep the weathered wood look.

2. Create Your Driftwood Sailboat Mast.

Cut your dowel or driftwood stick to approximately 12″ although this will depend upon the length of your boat base. Use your own discretion as to what looks best. Then drill a hole deep enough in the center of your boat base to hold your mast.

3. Eye Screws.

Insert your eye screws in the boat base at the front and back. These will be used to hold the sail in place. On my first sailboat, I actually used glue instead and curled the sails before tacking them in place with glue but on the second sailboat I held the sails in place with the embroidery thread and eye screws.

4. Prepare Your Driftwood Sails.

Layout your sail and cut it to form two sails. I had discovered an old box filled with and assortment of antique lacy and printed handkerchiefs in the attic which inspired me to do this project. I just thought they would make such pretty sails and a great decorative focal point especially if I made three. Here you can see my dowel piece is still a little bit too long for this handkerchief so I either need to cut it shorter or choose a different handkerchief for the sale.

5. Create Your Sails.

Cut your handkerchief to form two sails.

6. Stop the Fray.

Once you cut your sail, you will want to use “Fray No More” by Singer to stop the edges from fraying. Just run a bit along each cut edge.

7. Attaching the Mast and Sails

Glue your mast in place.

Use your embroidery thread to attach the sail sections to the mast – first the top and then the bottom. Then attach the sail to the eye screws in the front and back if you want the sail to stay displayed. I also starched the handkerchief so they would be nice and stiff.

See how simple that was? Now enjoy your sailboat – heck, make a fleet of them!

Using Driftwood in a Wedding or Party Theme

Posted on by

Using Driftwood in a Wedding or Party Theme

By Kim Foster

Whether you’re planning a romantic barefoot wedding at the beach or you’ve simply chosen a nautical theme party, using driftwood in a wedding or for your party is one of the most dramatic elements available for your party décor.

Not only is driftwood naturally-occurring and often obtainable for free, but it also adds a perfectly casual yet classy touch to your special occasion. Plus, as an added bonus, driftwood stands up to wind and weather, unlike expensive fresh flowers that will wilt in the heat. Check out these clever ideas for using beautiful, eco-friendly driftwood for your wedding or party. If you don’t have driftwood available to you locally, check out this tutorial on how to make your own driftwood, or these online sources for obtaining some good driftwood pieces online to get your projects started. Recommended from Amazon for creating Driftwood Furniture including driftwood arches – great for a wedding. Driftwood Furniture: Practical Projects for Your Home and Garden

• Driftwood Menus

Adding driftwood to your special event menu is a lovely way to add the driftwood theme to your tablescape. Buy inexpensive frames that have a back stand, make copies of your menu and insert into the frames, then attach driftwood pieces using a hot glue gun and your done. When the party is over, remove the menus and add your favorite photos from your special event.

• Driftwood Sailboats

Use simple Driftwood Sailboats as table décor. Follow these simple instructions for making these easy driftwood sailboats which look amazing when added to any beach themed wedding or party décor and are super easy to make. Surround your sailboats with other driftwood pieces, shells, candles, sand flowers and you have your simple yet elegant and inexpensive table decorations.

• Driftwood Arch

To begin with the most obvious and yet one of the most striking uses of driftwood, consider exchanging vows with your beloved under a driftwood arch. Driftwood arches range from stark and simple to breathtakingly intricate, and are easy to enhance in many ways, should you choose. You can cover the entire piece with greenery, or add fabric or ribbons to flutter in the ocean breezes. LED lights wound around the arch look lovely for a nighttime wedding, bringing that radiant glow to your face and that of your intended.

• Driftwood Vases

You can just easily make a driftwood vase for holding flowers as you can a driftwood candleholder – the same technique is used. Find a large cylinder glass vase – clear or even a pretty seaglass color that will show through will work just fine and attach it all the way around using a hot glue gun then just add your choice of flowers.

• Driftwood Signs

Signs are often used to point the way to the ceremony or reception, to urge guests to “Choose a seat, not a side,” or simply to display the names of the bride and groom with a loving message or a romantic quotation underneath. Driftwood signs look right at home in any natural or “shabby chic” venue, and are easy to personalize by painting freehand or using stencils. Driftwood can also be used to frame chalkboards, and messages in chalk can of course be erased after the big day, so you can continue to use the signs in the future.

• Place cards

Search online for “driftwood place cards” and you’ll find so many artful ideas you won’t know which to pick. For starters, you could decide to paint or carve each guest’s name directly onto a small piece of driftwood, creating for each person a unique wedding favor as well as a placeholder. If painting or carving seems too labor-intensive, you can cut small slits into pieces of driftwood to hold handwritten name cards, or drill tiny holes into any small, irregular pieces of wood and insert wire card holders. This idea from June Bug Weddings. Photo by Harrison Studio

• Driftwood Candleholders

If you’d like to add a cozy ambiance to your tables, driftwood can be used to make candle holders in countless imaginative styles. If you have a long driftwood log at your disposal, small divots can be cut into it to hold tiny tea lights. You might also arrange sticks of driftwood vertically around a glass candle holder, or directly around a wide candle itself. They can be decorated with ribbon, though twine or thin rope would also be in keeping with a nautical or beachy feel. For a tutorial on how to make driftwood candleholders click here.

• Driftwood Garland

When frilly bows and ribbons just won’t fit in with your theme, you can add a truly unique finishing touch to your wedding décor by creating driftwood garlands. Whether natural colored or whitewashed, a collection of driftwood twigs can be strung together and draped from furniture, laid casually on a tabletop, or used as a tie-back for fabric. Add a few sand dollars, shells, or starfish to turn it into an idyllic seaside accent.

• Driftwood Chandelier

For the more ambitious decorator, nothing says “drama” like a handmade driftwood chandelier. The idea is more do-able than you think, and like so many driftwood items, you’ll find that chandeliers can range from intricately entangled sculptures, wired for electricity, to plain driftwood sticks used to suspend candles in beautiful holders. Metal candle holders are often used and mason jars are popular, too, but any colored glass container can add interest to the piece and tie in with your wedding motif as well.

• Driftwood Cake Display

If you can find the right piece of driftwood, it can be a clever display to highlight a beautiful wedding cake, champagne fountain or food tray. Make sure your unique piece is capable of holding the weight of whatever you want it to hold and then properly balance and support it for a spectacular driftwood display your guests will be talking about for years.

• Driftwood, River Rocks and Flowers

There’s something simple yet serenely beautiful about smooth stacked river rocks and purposefully placed flowers against a backdrop of driftwood that will set the tone for a beach themed wedding. Hot glue them together so they stay attached then artfully place them on your guest tables or scatter them about your reception area to set a sea inspired zen like ambiance complete with driftwood, flowers and river rocks.

• Driftwood Centerpiece

Use driftwood as your centerpiece. Driftwood is naturally beautiful and can easily stand alone as a piece of sculpture or use it as an integral part and incorporate it along with other natural elements. Include flowers, stones, shells, intertwined or sculptural driftwood and candles. Simplicity is key. It doesn’t need to be elaborate to be beautiful. And don’t forget to add a hint of your colors for your special day, event or the season your celebrating.

The allure of driftwood lies in the history each fragment holds. Once young and green, every piece has traveled far and changed much from its original form. Tossed by the waves for many years, it has finally landed on the sunny shore—time-worn, but still strong and beautiful. There is no better symbol for an enduring marriage than driftwood!

Make Your Own Natural Beeswax Polish

Posted on by

How To Make Your Own Natural Beeswax Wood Polish

Did you know you can easily make your own natural beeswax wood polish? It’s as easy as making your own soap or candles. Add essential oils of your choice for different scents or just enjoy the sweet smelling beeswax as is. Experiment with different scents and different oils to create your own perfect blend. I love lavender and vanilla used with jojoba but I imagine orange oil mixed with sweet beeswax and coconut oil would be wonderfully intoxicating – like a day at the beach… However, you do want to make sure the oil used for scenting is food grade.

homemade beeswax furniture polish Beeswax not only smells great but it’s all natural and eco-friendly so you don’t have to worry about little ones or pets that like to chew on furniture. And, beeswax brings out the natural warmth in wood while repelling dirt, grime and water to keep your wood looking beautiful for years to come. Natural beeswax polish works great on driftwood pieces, butcher block countertops, wooden toys and wood furniture.

A clever user might pour the melted blend into a candy mold for use as a lip balm or hand moisturizer. How cute is that? Or use a candle making mold and give the homemade polish as great personalized gifts.

The recipe below will produce approx. 8 oz. of beeswax. The ratio is 1 part beeswax to 3 parts oil; however, if you prefer a softer wax, use more oil or a ratio of 1-4 and if you prefer a harder wax, use more beeswax.

Here’s what you will need:

2 oz. natural beeswax
6 oz. oil such as olive oil, coconut oil, jojoba oil, walnut oil, etc.
Pot – preferably a double boiler
essential oil(s) such as lavender, vanilla, sandalwood, etc. (optional)
Glass jar or tin with cover
Candle Thermometer

Directions:

Melt beeswax in double boiler over medium heat until it reaches 300 degrees F. Beeswax is flammable so do not let it get too hot and be sure to watch it carefully.
Carefully add in your oil of choice and stir until completely blended.
Remove from heat and add any scenting oils.
Pour melted mixture into glass or tin containers and set aside for several hour to let it harden.

Natural beeswax polish will last approximately 1-2 years depending on the oil you’ve chosen. Keeping it refrigerated will prolong its shelf life even more.

For an excellent video on the correct way to apply beeswax to furniture click here . HINT: DO NOT apply in a circular motion.

If you prefer to buy your polish already made – we now have Driftwood All Natural Beeswax Wood Butter.

Ideas for Landscaping with Driftwood

Posted on by

Landscaping with Driftwood

Landscaping with driftwood starts with a good plan and a some imagination. Since driftwood is already a work of nature, it’s not difficult to cohesively work it in somewhere as either a focal point or complimentary element with your existing natural environment.

Driftwood can easily be carved, sanded and finished to get the shape, texture and look you’re after or just leave it as is. Whether using smaller-sized pieces for projects like birdhouses or larger pieces to make sculptures or lawn and garden furniture, you’re guaranteed to end up with items that are completely unique since no two pieces of driftwood will ever be alike in shape, texture and color.

For instance, if you want to give visual height to an area, create planters from a combination of driftwood and airplants, orchids, succulents or bromeliads then attach them to a wall or tree and watch your new plants happily make themselves at home in the cracks and crevices of the driftwood. Your wall will soon be teaming with carefree greenery, shoots and flowers and become a focal point. The same idea can be used to create a horizontal focal point.

driftwood fencing Landscaping with driftwood can add visual interest and a focal point to areas that are frequently overlooked or otherwise seem to lack purpose and have no existing appeal. Imagine a large piece of driftwood where others might plant a tree or embed a large boulder – then surround your new sculpture with sea grass or wild flowers.

Think about adding a large driftwood pieces to a pond or other water feature you may have for a natural look. Driftwood on its own could make a unique and beautiful water fountain with the right tools and a little imagination.

Bind together long pieces of driftwood and attach a box to the top for a one-of-a-kind mailbox or create a driftwood Landscaping with Driftwood Bench chandelier for outdoor hanging in a special garden nook. Use it with candles or drape it with pretty flowers or vines.

How about creating driftwood retaining walls for flower beds or around trees by using 8″ linear pieces and sinking them into the ground. You can also create a heavier retainer wall with larger driftwood logs set end to end.

Thick, solid pieces of driftwood make wonderful benches or quaint chairs for sitting in unexpected places. Add a handcrafted driftwood table and you have yourself the perfect place to read a book and enjoy your garden while sipping an ice tea. Insert logs into the ground for natural fence posting.

There are a myriad of possibilities for landscaping with driftwood to create interest in your outdoor space. How will landscaping with driftwood inspire you?

Beach Style Decorating Ideas

Posted on by

Beach style decorating isn’t just for coastal beach houses and cottages by the seashore. It can be incorporated absolutely anywhere to soothe the nerves, provide positive energy and lighten the mood. Some simple beach style decorating tips can bring the therapeutic benefits of a vacation at the beach right into your home.

Start by installing an interior louvre door and painting it a vibrant Caribbean blue or a deep aquamarine. Louvered doors automatically stir thoughts of old casual beach cottages. Next, install some horizontal planking across one wall of the living room or a whole ceiling and whitewash it for an overall beach house ambiance. Continue the aqua colors in accent pillows, comfy throws and an area rug. Toss in the bright orange of a warm beach sunset.

Go boldly into beach style decorating with unusual and unexpected color in the kitchen. Paint the kitchen island an eye-catching sea green and repeat the color in the window treatments. White or shell cabinets and a sea glass backsplash provide just the right amount of contrast while giving you that sand swept beachy feel.

If you’re not that daring, go to the opposite end of the spectrum and make nearly everything stark white. Then paint the wooden floor and the

cabinet doors a subtle sandy color. Easily add some sophistication with the texture of stainless steel appliances and accents. Purchase or create your own accessories with a nautical or coastal theme with using driftwood, shells and sea glass to create the feeling of being near the sea. Hang some artwork depicting the seaside and fill some shelves with picture frames and treasure boxes bordered in delicate shells. Translucent blue glass accents bring the sea inside.

Wall decor made of woven sea grass and random room accents made of wicker strengthen the aura of a retreat by the beach. Driftwood, when adapted as a home decorating accessory, is extremely versatile and lends itself to endless creative ideas. Weathered driftwood can be hung on a wall as is or insert a simple airplant and use as a planter. Equip it with some small hooks and dangle some souvenirs from the beach. Pick up an inexpensive wood-framed mirror and attach small pieces of driftwood around the border.

Gathering several pieces of driftwood that are all near the same length, tie them together with sea grass or nautical rope and stand them on their ends. Use this as the base for holding dried wild flowers. If you have a large section of driftwood, secure it to a wall, attach some hooks and use it as an unusual hat rack. Try making one of our suggested driftwood candleholders or driftwood lamps. Refinish a great flea market find with a driftwood finish by using Driftwood Weathering Wood Finish or one of our alternative homemade techniques.

If you have a pool, construct a backyard open-air cabana. Basically, this consists of nothing but a simplistic frame and a roof-like covering. Add floor to ceiling canvas curtains tied back to each post and create a look that’s as soft as a sea breeze. Add some more lush plants. Fill it with accent pieces that have seaside motifs like palm fronds, shells or marine life.

Outdoors, landscape with solar lighting as a reminder of the sun’s subtle energy. Indoors, adorn a few side tables with a grouping of sand candles.

Lighten up your mood and your atmosphere with beach style decorating. It’s the next best thing to being there.

Creating a Driftwood Finish

Posted on by

If you’re anything like me, you love the look of driftwood furniture. The aged and worn look just appeals to me although most of the pieces I see for sale in the major stores are not actual driftwood but wood that’s made to look weathered, usually with painting techniques. So I began a quest to find out how I could get that same look at home. After all, I was experienced at refinishing furniture, painting, staining and distressing – why not try my hand at this driftwood finish look.

And there’s nothing more satisfying than finding a beautiful piece of furniture in a thrift store that someone else has discarded – no longer useful to them. I’m one of those that can see its possibilities and I’m quick to snap it up, take it home and give it a whole new life.

I found myself a gem of a side table at one local thrift store. It was perfect. I stripped off the old stain and finish and had initially decided that I wanted a distressed white look. After about four months of this distressed white table, I decided I wanted it to look more like a driftwood finish. I was seeing driftwood tables, beds and lamps, etc. everywhere and I wanted it.

An indepth search on the Internet revealed some very interesting processes that others were using to achieve that driftwood finish. Some with paint (which I also did and it came out great and you can read that post – Creating a Driftwood Finish With Paint), others with concoctions of vinegar and steel wood and still others using baking soda, tea and coffee.

Along the way, I discovered my own mixture, which I call Driftwood Weathering Wood Finish, and to my surprise, it worked beautifully on that little white table once I had stripped and sanded it again. But I still wanted to test the other methods I came across so below you will see a video of the five different methods I used on 3 different types of wood – oak, pine and birch. I will show the initial application and the outcome 24 hours later.

The five methods I use to achieve a weathered wood driftwood finish are:

#1 – Tea – Steeped green tea in 1/2 water for several hours.

#2 – Coffee – Steeped coffee grounds in 1/2 cup water for several hours.

#3 – Vinegar & Steel Wool (3 Cups White Vinegar and 1 steel wool pad – soaked for 45 days, although you really only need to soak it for 24 hours – I just happen to still have a mixture still around from another project);

#4 – Baking Soda & Water (1/4 Cup water to 1/8 Cup baking soda); and

#5 – Driftwood Weathering Wood Finish – which you can now buy here on our website or through Amazon

Watch Video

How to Clean Driftwood

Posted on by

You’ve been lucky enough to find a unique piece of driftwood that you want to use for a project but now how do you clean it? The forces of nature may have already removed much of the debris and hopefully, left you a nicely weathered and smooth finish to start with but you still need to be able to remove the dirt, mold, parasites and other critters that may be lingering in your driftwood.

If you’re using your driftwood for an aquarium, you will need to use a natural process to clean driftwood without any chemicals. If your pieces are small enough, you can boil them but you may split and crack the wood. A better way to clean driftwood, and one that you can use regardless of whether you use the driftwood in an aquarium or not, is the slow soaking method using distilled water.

Clean Driftwood Using the Distilled Water Soaking Method

Scrub your wood with a sturdy scrub brush to remove loose debris and surface dirt. Fill a large container with enough distilled water to cover your wood. I suppose one could use a bathtub if you don’t have a large container but I’m not sure what may be left behind in your tub once the process is finished.

The driftwood needs to soak, fully covered, in the distilled water for at least two weeks, and you will need to change the water several times when it becomes dark with the leached tannins. The tannin is what gives the wood its color and we want to get rid of as much color as possible in this process, along with any other critters. You can place a large rock or something heavy to hold down your driftwood while it soaks.

After two weeks, remove the wood and place it somewhere where it will be able to dry undisturbed in an environment with low humidity.

Once it is dry, you can use it for whatever driftwood project you wish.

Clean Driftwood Using the Disinfecting Method

Mix a solution of one part bleach to nine parts water and fill a large container so that there is enough solution to completely submerge your driftwood. Place your driftwood in the solution. Soak your driftwood for 3 or 4 days, changing out the disinfecting solution each day.

Remove your driftwood and let it dry undisturbed in an environment with low humidity.

You should not use clean driftwood that has been chemically bleached in an aquarium with live plants or animals.

Also see Refinish Driftwood

How to Create a Driftwood Candleholder

Posted on by

Three Simple Driftwood Candleholders You Can Make Yourself

Driftwood Candleholder Style #1

You will need:

enough cleaned driftwood pieces to fit around your glass candle container
multi-purpose epoxy glue
glass contained candle
raffia or twine (optional)

Directions:

For this style driftwood candleholder, you will want to have enough clean driftwood pieces to go around your glass container candle – 10-20 pieces to chose from depending on the size of your glass container . It’s best to use 1″ thick linear pieces rather than awkward shaped driftwood pieces.

Determine how tall you want the height to be. Some prefer the height to be just to the top of the glass while I’ve seen others extend it 2-3

inches taller than your glass container. Either way looks great.

Saw off the ends of each piece so they will line up evenly at the bottom around the your glass container while still giving you the height you want.
Now one by one, line up a piece with the bottom of the glass container and begin gluing. Continue until you have completed the circumference.

Wait until the glue dries according to the package before using.

You may wish to dress up your container with raffia or twine.

A great decorating tip is to create three of these candleholders of various heights for use in displaying.

Driftwood Candleholder Style #2

You will need:

Driftwood
candles in glass votive holders or tea lights in tin holders
drill
1 3/4″ (44 mm) hole saw – which is a type of bit that will fit on a drill and create the holes (available at Lowe’s and Home Depot)

Directions:

Suppose you have a wonderfully unique piece that is too big to use for the first style candle holder but you really want a driftwood candleholder. If you have a piece that will sit solidly on a flat surface without being “tippy”, then this is a good option for making your unique driftwood candle holder.

Lay your driftwood piece on a flat surface and determine where you might want to put one or more candles. Space them out so they won’t cause a fire hazard when lit.
Once you have identified where you want the candles, mark the center.
Now secure your driftwood and drill your holes using the hole saw drill bit to match the size of your votive or tin candle holders. Drill no more than 1/2″ for tin tea lights. You can drill deeper for votive holders. You want to make sure that the hole is not so deep that a lit candle will catch the surrounding edges of the driftwood on fire.

I’ve seen this style used with elaborate pieces and many candles, as well as with one hole and one simple candle – and they are all beautiful.

Driftwood Candleholder Style #3

You will need:

thick cut of driftwood (4″ or more circumference)
drill
1 3/4″ (44 mm) hole saw – which is a type of bit that will fit on a drill and create the holes (available at Lowe’s and Home Depot)
glass votive holder or tea light tins

Directions:

Cut both ends of your driftwood so both the top and bottom are flat.
Using the hole saw drill bit, drill a hole in the center of the top deep enough to fit your tin or votive holder.
Insert your votive or tin.

This style looks best when the votive or tin sits almost level with the driftwood surface.

A great tip is to make three of this style in various heights for a great display.

There you have it – a driftwood candle holder style for everyone!

Other projects to try: Driftwood Lamp; Driftwood Sailboat; Driftwood Christmas Tree, Driftwood Windchime, Driftwood Clock